2017 Mako 21 Lts

The MAKO® 21 LTS is an aggressive inshore predator that's ready for any inshore challenge. Built to specs supplied by top redfish tournament pros, the 21 LTS sports our patented Rapid Planing System⢠transom and MAKO performance fiberglass hull. The combination gets you on plane fast, increases engine efficiency and pumps up top-end speed by feeding water directly into the prop.
The hull/deck joint is chemically bonded 360° & mechanically fastened every 6" with stainless steel fasteners for a lifetime of durability. And the 21 LTS comes with a MAKO tandem-axle aluminum trailer and a Mercury® outboardâ”and you can optionally power up to a 225HP if you feel the need for more speed.

• Backed by the MAKO® Assuranceâ”the best warranty in the business
• Raised bow & aft casting deck w/non-skid surface
• Award-winning Rapid Planing System⢠hull design for quick holeshots & nimble handling
• 90-qt. (85.17 L) port & starboard bow boxes w/stainless steel compression latches
• Removable 72-qt. (68 L) forward-console cooler/seat w/integrated cushion
• Huge cockpit w/360° mobility/fishability & 94-qt. (89 L) cushioned helm seat/cooler
• In-deck hatch for easy access to 1,000 GPH (3,785 LPH) bilge pump
• Aft casting deck w/2 large dry storage compartments
• 30-gal. (114 L) aerated aft baitwell w/Pro-Air® system
• Custom-matched aluminum trailer w/Sure Lube hubs

Additional Specs

• Length:21' 0"
• Beam: 8' 4"
• Max. recommended HP: 225 HP
• Fuel capacity: 60 gal.
• Max. person capacity: 7 persons
• Max. person weight: 1100 lbs.
• Max. weight capacity : 2100 lbs.
• Cockpit depth: 0'
• Transom height at center line: 27'
• Deadrise: 16 degrees
• Draft: 12'
• Approx. hull weight: 2100 lbs.
• Approx. package weight: 3310 lbs.

Standard Features

Comfort, Convenience & Peace of Mind

• Backed by the MAKO® Assurance�”the best warranty in the business
• NMMA Certified
• Factory leak tested for hull, plumbing & fitting integrity
• Stainless steel hardware & fasteners for corrosion resistance
• Fire extinguisher
• Horn

 

Console

• Stainless steel destroyer-style steering wheel
• SeaStar™ hydraulic steering
• Removable 72-qt. (68 L) forward-console cooler/seat w/integrated cushion
• Elevated fiberglass console
• Contoured acrylic windscreen
• Analog tachometer, fuel gauge & water pressure gauge
• Area to flush- & surface-mount additional electronics
• Binnacle-mounted remote motor control w/power trim switch
• Dual battery switch
• Heavy-duty anodized aluminum grab rail
• 2 stainless steel drink holders w/drainage system

 

Construction & Exterior

• 100% composite construction
• Encapsulated, fiberglass-infused transom w/high-density Coosa® Bluewater composite core
• Molded, patterned non-skid casting platforms & cockpit sole
• Console chemically bonded & mechanically fastened to deck w/.25" (.6 cm) aluminum backing plates
• Hull/deck joint chemically bonded & mechanically fastened w/stainless steel fasteners for strength & durability
• Integrated 1-piece molded, gelcoated fiberglass stringer grid system w/gelcoat finish & fully injected w/closed-cell foam flotation
• High-density, fiberglass-infused trolling motor mounting core
• Marine-grade stainless steel hardware & fasteners throughout
• Gelcoat finish on all bulkheads & compartment interiors
• Self-bailing cockpit
• Composite seat substrates
• Heavy-duty rub rail
• MAKO® White gelcoat

 

Electrical, Mechanical & Plumbing Systems

• 1,000 GPH (3,785 LPH) cartridge baitwell pump w/auxiliary inlet port
• 1,000 GPH (3,785 LPH) bilge pump w/auto switch
• High-speed raw water pickup
• Integrated EPA-compliant fuel system w/rotocast corrosion-free fuel tank
• Interstate® cranking battery w/tray
• 6-circuit ATO/ATC distribution fuse block
• Marine-grade rocker switches w/push button breaker protection
• Marine-grade tinned wiring w/submersible connectors
• USCG-compliant navigation lights
• 2 cockpit courtesy lights
• 12V outlet

 

Hardware & Accessories

• Seven 6" (15.24 cm) stainless steel low-profile pull-up cleats (fore, spring & aft)
• Powder-coated transom reinforcement plate w/MAKO® logo
• Reboarding step & stainless steel grab handle
• Stainless steel & bronze thru-hull fittings
• Stainless steel bow & stern eyes
• Stainless steel fuel fill & vent fittings

 

Interior

• Anodized aluminum helm seat frame w/4-rod rocket launcher & removable 94-qt. (89 L) cooler w/integrated seat cushion
• Lockable port & starboard bow storage boxes w/stainless steel latches
• Center bow storage locker
• 90-qt. (85.17 L) port & starboard bow boxes w/stainless steel compression latches
• 136-qt. (128.70 L) center bow storage compartment w/locking stainless steel compression latch
• 2 large aft guttered & gasketed lock-down dry storage compartments
• 30-gal. (114 L) aft baitwell w/Pro-Air® aeration system
• 360° fishability
• 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
• Closed-molded coaming boards
• Closed-molded laminate hatch covers w/finished undersides
• Anchor locker

 

Performance

• Award-winning Rapid Planing System transom for quicker holeshots, shallow-water abilities & better overall performance
• Factory-rigged w/matched propeller

 

Trailer

• Custom tandem-axle trailer
• Dual-axle brakes
• Sure Lube hubs
• 1,000-lb. (453.6 kg) capacity tongue jack
• Aluminum construction
• Stainless steel hardware
• Galvanized steel components
• LED marker lights
• PVC loading guides

Disclaimer

We employ best efforts to present accurate pricing, specifications, features and availability for models shown on this site. On occasion, data transmission errors may produce anomalies in information presented. Photos could show optional accessories not included in the listed price or not available on the actual model in stock. Should you have questions about what you see here, your dealer will be able to confirm correct availability, model content and pricing. Inventory shown is subject to prior sale or transfer to another location.